Metal roofing is one of the most recommended roofing systems worldwide. Should you also consider this for your Calgary AB home? Find out everything you need to know about it including the metal roofing prices.

Read Also: 2019 Roofing Guide: How Much Is A New Roof?

Are they affordable or not? Read on to unlock the answers to your toughest metal roofing questions.

Metal Roof vs Asphalt Shingles

In terms of cost, we could say that asphalt shingles are one of the most affordable options out there. However, it’s also important to know how they compare with metal roofing prices.

Asphalt shingles are so inexpensive you can even find products that cost as low as $1 per square foot. The average is at $3 to $5 per square foot which isn’t so bad at all. This price range is still pretty affordable for most homeowners.

When it comes to metal roofing prices, it can vary but the starting rate is usually at $6 per square foot and above. This is obviously pricier than asphalt shingles.

Given the slight price difference, why should you choose metal roofing over a cheaper option?

Continue reading on below to know why metal is more expensive but is still a good choice after all.

What Makes Metal Roofing More Expensive?

If you’ll do the math, there’s about $1 to $5 average price difference between asphalt shingles and metal roofing. Admittedly, this could already be a significant amount if you’ll compute for the total spending.

Before you quickly come to the conclusion that asphalt shingles are still the number one choice, here are the top reasons why metal roofing is more expensive. Perhaps, you might want to look at a few good points which could also support the fact that it’s slightly pricier.

Long Life Service

For some, metal roofing is as good as a lifetime. However, on average, they do last for about 50 to 70 years depending on the consistency of the maintenance program.

While asphalt shingles may be cheaper at the onset, it’s important to note that they can only reach up to around 25 years. This is far from what metal roofing can guarantee in terms of longevity.

The amount that you’ll add up to the total roofing cost will surely take you further.

Minimal Maintenance Needs

Metal roofs are 100% reliable all year round. Of course, every roofing system needs your proper attention. But with metal roofing, it’s easier. It’s known to be low maintenance, hence, you can spend more time with other important tasks.

Asphalt shingles, on the other hand, should be carefully monitored every season. Failure to implement necessary maintenance procedures can greatly affect the integrity of your roofing.

Tough Against Harmful Elements

If there’s one thing that metal is good at, it’s probably defending your property against external threats.

Yes, it’s the job of every roof to property the entire house. But with metal, they do it really well. In fact, it’s fire, moisture, rot, and plant growth resistant. Whatever the weather condition is, you got peace of mind.

Asphalt shingles are more delicate especially when it comes moisture absorption. Strong wind impact can also tear-off an entire asphalt shingle roof in a single blow.

Old mossy asphalt roofing shingles in need of replacement

Asphalt shingles are not exempted to moss and plant growth. If the condition worsens, the roofing becomes subject to an emergency replacement.

Higher Energy Efficiency

Metal roofing presents a greater opportunity to save on energy consumption than asphalt shingle roofing. The metal material helps preserve a cooler temperature within your property because it can effectively reflect heat coming from the sun.

According to reports, a homeowner can save 40% more on electricity bills with a metal roof.

Why Do Metal Roofing Prices Vary?

Metal roofing prices vary because they come in different forms. While they are all under the same category, the materials are unique when it comes to performance and cost.

Get to know metal roofs a little bit more by scrutinizing them one by one…


Average price: starts at $6 per square foot

Steel is popular among residential constructions. You can further categorize it either as a galvanized or galvalume steel.

When it comes to the quality, you can never go wrong with steel considering the affordability that it offers. Many homeowners choose this for their home because of its design flexibility and overall reliability.


Average price: ranges from $7 to $12 per square foot

This type of metal roofing is also popular for residential use. Aluminum may be slightly pricier than steel but its resistance to corrosion and excellent insulation properties make up for the additional amount.


Average price: ranges from $10 to $14 per square foot

Copper material works best as roofing accents because of its elegant appearance. You would normally find it installed in dormers, windows, and other exterior areas of a property (that a homeowner wants to highlight).

The price is obviously more expensive. However, you should be extra careful with copper as it isn’t prone to scratches and dents. In fact, it could easily sustain surface damages.

Since this material is delicate, you always have to seek professional assistance. Otherwise, it wouldn’t appear as expected.


Average price: ranges from $10 to $20 per square foot

Zinc is another high-end metal roof material. Though it may not be the immediate choice when considering metal roofing, it’s not less of an option.

Zinc offers great flexibility and also comes out bespoke if installed correctly.

How To Find A Metal Roofing Expert?

The key to any successful roofing installation is finding a roofing contractor that can do the job for your excellently.

Fragment the brown metal roof of the house in the form of roof tiles with many drops after the rain

A metal roof that has been installed by a licensed roofing company can effectively repel water and prevent it from penetrating the house.

As for metal roofing, it shouldn’t be too hard to find an expert. That’s if you know where to start.

Here are some tips that we’d like to share with you so that you wouldn’t end up with the wrong choices. (By wrong choices we also mean poorly spent investments.)

Ask for client references

This is very important because you’ll be able to learn about what roofing systems they are capable of handling correctly.

Review their portfolio

A credible roofing company keeps a copy of all their projects to serve as a guide for new homeowners.

The number of years they have been operational

Aside from knowing their running years in service, you also need to secure a copy of their business permits and licenses.

Request for a comprehensive quotation

The right roofing company will not ask any form of payment from you unless both parties have signed a contract.

If you’ve checked all these items, the roofing company is most likely legitimate and trust-worthy. If they fail to meet one of those, we recommend that you keep searching until you find the right one.


Cost is an extremely important part of the roofing equation. You cannot move forward without computing for possible expenses. When it comes to roofing, it’s not always about the cost. For instance, when you compare metal roofing and asphalt shingle, you may notice the price difference. However, this doesn’t give you the license to immediately come up with a decision.

While metal roofing may be slightly more expensive the asphalt shingle roofing, there are reasons that make up for it. If you want to know more about metal roofing, you can always go back to this blog entry.

For other questions about metal roofing prices, metal roof paints, or if you aren’t simply convinced enough, we encourage you to give us a call: 587 315 6811.

If you have yet to find an exceptional and results-oriented Calgary AB roofing company with decades of experience, you need not look any further.

No Payne Roofing, Inc. is a Calgary-based roofing company that has been in the industry since 2012. We’ve handled different cases and we’re ready to conquer more this 2019. If you want to achieve beautiful and long-lasting roofing, you know who to call.